Scanned for codes, P0300 and P0308 were stored. Monitored the miss fire datat and the #8 cylinder had a high amount of miss fires. The ignition coil wasn't firing intermittently. The spark plug is an autolite plug and wasn't tight in the head. Replaced all plugs and coils. Cleared the codes and road tested the repairs.
There is a C2202 stored. This code deals with a vin mismatch or missing issue. Will need to diagnose the code if you want to go further.
Scanned for codes P0300 and P0308 was stored. Pulled #8 spark plug for inspection. Replaced the ignition coil, the spark plugs and all remaining COP boots
The compressor cycles more than it should. It may be low on charge causing the cycling. Will need to service the system to begin with. No further repairs authorized at this time
Shelby M. gave our service a 5 star review on 7/10/2024
ROAD TESTING AND INSPECTION- NEEDS RADIATOR, ENGINE OIL COOLER, THERMOSTAT AND COOLANT FLUSH TO START. MAY HAVE OTHER ISSUES RELATED TO OVERHEAT CONDITION. OWNER DECLINED FURTHER REPAIRS. EST. $1975
COOLING SYSTEM PRESSURE TEST- Check belts and hoses, pressure test cooling system.
Janet M. gave our service a 5 star review on 7/28/2023
Replace front brake pad linings and machine front brake disc rotors to spec. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
Replace rear brake pads. Machine rotors to spec. Clean and lubricate rear brake caliper slide mechanism. Adjust parking brake. Road test vehicle.
Lubricate and check chassis. Change oil and filter. Check air filter. Check all fluid levels and tire pressures. Perform maintenance inspection.
Dan N. gave our service a 5 star review on 8/25/2022