Scanned for codes P0741 and P1744 are stored. There is an information bulletin pertaining to both codes. Replacing the converter and related parts as well as the control module will need to be performed to repair this issue. THe vehicle sill need to go to the dealer for repairs
The problem possibly started after a heater hose was replaced???
Glenn C. gave our service a 5 star review on 4/26/2023
Recovered .34 Lb. Evacuated and recharged the system with 2.25 Lb of R-134. Added UV dye as needed. Inspected for leaks. No leaks were found at this time.
Replaced the left tag light bulb and the HMSL bulb
Daniel F. gave our service a 5 star review on 3/25/2023
The clutch disc was worn down to the rivets, the roller bearings were missing in the pilot bearing and thus damaged the input shaft of the transmission. Replaced the flywheel, clutch assembly, slave cylinder assembly and the pilot bearing. Installed a used transmission. Road tested the vehicle.
Replaced both upper control arms/ball joints
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center steering wheel. Additional parts and labor extra.
Replace front brake pads and rotors. Cleaned and repacked wheel bearings. Replace wheel seals. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
Flush brake hydraulic system with BG DOT 4 fluid. Road test for proper brake function.
David R. gave our service a 5 star review on 3/22/2023
SCANNED HVAC SYSTEM- NO CODES PRESENT- AND CYCLED TEMP DOORS TO LIMITS. NO PROBLEM FOUND. CHECKED COOLANT LEVEL AND CONDITION- OK AT THIS TIME. UNABLE TO DUPLICATE CUSTOMER CONCERN.
Barbara K. gave our service a 5 star review on 1/26/2023